Siemens scalance WLC711 Reference Manual page 167
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
1-65535
Examples
The following example sets the time interval between outgoing packets to 10 seconds:
WLC.siemens.com
linkcost
Use the
linkcost
linkcost 1-65535
Parameters
1-65535
Examples
The following example sets the Link Cost of the port to 10:
WLC.siemens.com
retransmitinterval
Use the
retransmitinterval
to retransmit outgoing packets
retransmitinterval 1-65535
Parameters
1-65535
Examples
The following example sets the retransmission time interval to five seconds:
WLC.siemens.com
status
Use the
command to enable or disable OSPF advertising on the port.
status
status ( enable | disable )
SCALANCE WLC711 CLI Reference Guide
Specifies a time interval in seconds
:ip:ospf:ospfinterface:top1# hellointerval 10
command to assign a Link Cost to the port.
Specifies a numerical value
:ip:ospf:ospfinterface:top1# linkcost 10
command to set the amount of time the port waits before it attempts
Specifies the time interval in seconds
:ip:ospf:ospfinterface:top1# retransmitinterval 5
ip Commands
linkcost
167
Advertisement
Table of Contents
