Siemens scalance WLC711 Reference Manual page 387

Transmit Queue: none
Synchronize: enable
WLC.siemens.com
name
Use the command to change the name of a CoS. The
name
cos:<named-cos> context.
name new-name
Parameters
new-name
Usage
You must enter the
change to take affect. The CLI prompt does not change until you exit and re-enter the cos:<named-
cos> context.
Examples
The following example:
•
Renames the CoS your-cos to my-cos
•
Applies the change
•
Displays the my-cos configuration
•
Exits cos:<named-cos> context
•
Re-enters the cos:<named-cos> context as my-cos
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Name: my-cos
Use Legacy Priority Override defined in the WLAN Service: disable
802.1p Priority: none
ToS/DSCP Marking:
Mask:
Inbound Rate Limit:
Outbound Rate Limit:
Transmit Queue: none
Synchronize: enable
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:cos:my-cos#
Specifies the new name for this <named-cos>.
command before exiting the cos:<named-cos> context for the CoS name
apply
:cos# your-cos
:cos:your-cos# name my-cos
:cos:your-cos# apply
:cos:your-cos# show
:cos:your-cos# exit
:cos# my-cos
:cos:my-cos#
command is accessible from within the
name
cos Commands
name
387