Siemens scalance WLC711 Reference Manual page 160

port
Use the command to enable or disable the port administration status of the layer 2 port in this
port
context. The
port
port enable | disable
Parameters
enable
disable
Examples
The following example enables the administration status of lag-member ports in an l2ports:lag1#
context:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Admin: enable
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
command is accessible from the l2ports:<named-LAG-port> context.
Enables the administration status for the port for this context.
Disables the administration status for the port for this context.
# l2ports
:l2ports# lag1
:l2ports:lag1# port enable
:l2ports:lag1# apply
:l2ports:lag1# show
:l2ports:lag1#
l2ports Commands
port
160