Topology-Group - Siemens scalance WLC711 Reference Manual

strict-subnet
Use the
strict-subnet
The
strict-subnet
for b@ac topologies.
strict-subnet enable | disable
Parameters
enable
disable
Example
The following example enables strict subnet adherence on a b@ac topology:
WLC.siemens.com
sync
Use the command to enable or disable automatic synchronization of this topology across paired
sync
controllers. The
sync
for b@ac, b@ap, and routed topologies.
sync enable | disable
Parameters
enable
disable
Example
The following example enables synchronization:
WLC.siemens.com

topology-group

Executing the
topology-group
which you can create or delete topology groups. The
topology context.
A Topology Group is a list of topologies associated with a unique name and a VLAN ID. All the
topologies in a defined topology group have the same type: either B@AC or routed. Any time the
controller MU Session Manager assigns a role, any topology group in the role will be replaced by a
member topology contained in the group. If a topology group is referenced multiple times, only 1
topology from the group is selected. A different user could be assigned a different member topology
SCALANCE WLC711 CLI Reference Guide
command to enable or disable strict subnet adherence on a b@ac topology.
command is available from the topology:<named-topology> context of the CLI
Enables strict subnet adherence.
Disables strict subnet adherence.
:topology:bridged_ac1# strict-subnet enable
command is available from the topology:<named-topology> context of the CLI
Enables synchronization.
Disables synchronization.
:topology:r1# sync enable
command moves you into the topology:topology-group context, in
command is entered in the
topology-group
topology Commands
strict-subnet
372