Siemens scalance WLC711 Reference Manual page 181

active
passive
Example
The following example sets the scan type to active:
WLC.siemens.com
WLC.siemens.com
show
Use the command to display the settings for the scan group.
show
show
Parameters
None
Example
The following example displays the scan group South Block's settings:
WLC.siemens.com
Interval 100
dtime 300
radio both
channel current
type active
serial 0500006072051354 0500006072051427 0500006062051048 0500006062051040
Security Scan: enable
scprof
The command moves you to the scprof context, which contains commands to create and
scprof
delete scan profiles. Scan profiles define In-service scans for AP37xx and AP38xx series APs. The
command is accessible from the mitigator context of the CLI.
scprof
For Out-of-Service scanning of AP37xx and AP38xx series APs in scan groups, see the
command.
InService profile can do Rogue AP scanning as well. Rogue scanning can be enabled after Security scan
has been enabled.
The following commands are available in the mitigator:scprof context:
•
create on page 182
•
delete on page 182
SCALANCE WLC711 CLI Reference Guide
Specifies active type scanning
Specifies passive type scanning
:mitigator:scgroup:South Block# type active
:mitigator:scgroup:South Block# apply
:mitigator:scgroup:South-Block# show
Radar Commands
show
page 177
181