Chapter 10: Mobility Commands; Backupmanagerip - Siemens scalance WLC711 Reference Manual

10
mobility Commands

backupmanagerip

mrole
mport
mheartbeat
slpreg
agent
secmode
mdismethod
mmanagerip
Multiple Wireless Appliances on a network can share and exchange client session information, which
enables a wireless device to roam between Wireless APs on different Wireless Appliances without
service interruption.
This section describes the commands required to configure the Mobility options for the Wireless
Appliance. These commands are located in the mobility context of the CLI.
All CLI commands cache changes. For this reason, sometimes when you make a change in a particular
context, the change may not be visible immediately. If this happens, exit and re-enter the context so
that the database is synchronized with the latest change.
The following commands are available in the mobility context:
•
backupmanagerip
•
mrole on page 199
•
mport on page 199
•
mheartbeat on page 199
•
slpreg on page 200
•
agent on page 200
•
secmode on page 201
•
mdismethod on page 201
•
mmanagerip on page 202
backupmanagerip
Use the
backupmanagerip
mobility zone. The role of the Wireleses Appliance must be set to Agent before this option becomes
available (see mrole
backupmanagerip IP Address
SCALANCE WLC711 CLI Reference Guide
on page 198
command to configure an IP address for the backup manager in the
on page 199 for more information).
198