Siemens scalance WLC711 Reference Manual page 364

foreign-ip
Use the foreign-
ip
foreign- command is available from the topology:<named-topology>:l3 context of the CLI for b@ac
ip
and routed topologies.
foreign-ip A.B.C.D/0-32
Parameters
A.B.C.D/0-32
Usage
The command is not available when a controller is in standalone mode.
foreign-ip
Once an availability pair is established between two controllers, the
visible after "sync" is enabled.
Example
The following example specifies the IP address and mask of the foreign controller:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
gateway
Use the command to specify the gateway IP address. The
gateway
from the topology:<named-topology>:l3 context of the CLI for the Admin topology.
gateway A.B.C.D | none
Parameters
A.B.C.D
none
Example
The following example clears the gateway IP address:
WLC.siemens.com
gateway-ipv6
Use the
gateway-ipv6
command is available from the topology:<named-topology>:l3 context of the CLI for the Admin
topology only.
gateway-ipv6 A:B:C:D:E:F:G:H | none
SCALANCE WLC711 CLI Reference Guide
command to specify the IP address and subnet mask of the foreign controller. The
Specifies the IP address and subnet mask.
:topology:r1# sync enable
:topology:r1# l3
:topology:r1:l3:# foreign-ip
Specifies the gateway IP address.
Clears the gateway IP address.
:topology:Admin:l3:# gateway none
command to specify an IPv6 gateway IP address. The
topology Commands
foreign-ip
command is only
foreign-ip
command is available
gateway
gateway-ipv6
364