Create - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
tg-selection (round-robin | mac | random | least)
Parameters
round-robin
mac
random
least
Examples
The following example sets the topology group selection algorithm to random:
WLC.siemens.com
vlan-policy
Use the
vlan-policy
After you run the
vlan-policy
vlan-policy (add|update vlan-id policy name) |(remove vlan-id
Parameters
add | update
remove
vlan-id
policy name
Examples
The following example updates the VLAN mapping (vlan-id 102) to the test2 policy:
WLC.siemens.com
create
Use the
command to create a new VNS. This command is available in the vnsmode context.
create
After you create a VNS with this command, you can configure additional parameters in the
vnsmode:<named-VNS> context. Refer to
After you run the
create
create vns name wlans WLANS name pol role-name
SCALANCE WLC711 CLI Reference Guide
Specifies that the round-robin topology group selection algorithm is used.
Specifies that the mac topology group selection algorithm is used.
Specifies that the random topology group selection algorithm is used.
Specifies that the least topology group selection algorithm is used.
:vnsmode:adminctr# tg-selection random
command to map a VLAN ID to a policy.
command, run the
Adds or updates the mapping of the specified vlan-id to the specified policy.
Removes the vlan-id mapping from the policy.
Specifies a VLAN to map to or remove from the specified policy.
Specifies a policy to which a VLAN is mapped.
:vnsmode:adminctr# vlan-policy update 102 test2
<named-VNS>
command, run the
apply
VNS Commands (vnsmode)
command to implement the changes.
apply
on page 264 for more information.
command to implement the changes.
vlan-policy
241
Advertisement
Table of Contents
