Siemens scalance WLC711 Reference Manual page 405

radio2-strictlimit
Use the
radio2-strictlimit
Radio2. When enabled, any clients in excess of the configured limits on the radio are immediately
disconnected. The
radio2-strictlimit (enable | disable)
Parameters
(enable | disable)
Usage
Radio Load Control must be enabled for this radio before this command can take effect.
Example
The following example disables strict load limiting on Radio2:
WLC.siemens.com
remove
Use the command to remove the named RADIUS server from this site. The
remove
is accessible from the site:<named-site> context.
remove radius name
Parameters
radius name
Example
The following example removes server R-1 as the RADIUS server from site1:
WLC.siemens.com
replace-station-id
Use the
replace-station-id
name function. The
replace-station-id (enable | disable)
Parameters
enable | disable
SCALANCE WLC711 CLI Reference Guide
command to enable or disable strict enforcement of load limits on
command is accessible from the site:<named-site> context.
radio2-strictlimit
Enables or disables the strict enforcement of load limits on Radio2.
:site:site1# radio2-strictlimit disable
Specifies the name of the RADIUS server used on this site.
:site:site1# remove R-1
command to enable or disable the call station ID replacement with site
command is accessible from the site:<named-site> context.
replace-station-id
Enables or disables the replacement of the call station ID with the site name.
site Commands
radio2-strictlimit
command
remove
405