Siemens scalance WLC711 Reference Manual page 219

Parameters
username
security (noAuthNoPriv |
authNoPriv | authPriv)
md5 | sha
authpassword des
privpassword
enable | disable
delete
Examples
The following example creates an SNMPv3 user named "test" with an authPriv security level using MD5,
an authentication password of "tester1234" and a privacy password of "tester1234":
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Specifies the SNMPv3 user to configure for use with SNMPv3 traps
Specifies the security options to use with this SNMPv3 user (Noauthnopriv,
Authnopriv, or Authpriv)
Specifies the authentication protocol to use when security level is set to
authNoPriv or authPriv.
Specifies the authentication password and the DES protocol to use when
security level is set to authNoPriv or authPriv. DES must be used when the
security level is set to authPriv.
Specifies the privacy password to use when security level is set to authPriv.
Enables or disables an existing user
Deletes an existing user
# user test security authPriv md5 tester1234 des test1234
snmp Commands
user
219