Auth - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
None
Examples
The following example saves login configuration changes:
WLC.siemens.com
auth
The
command moves you into the login:auth context, which contains commands to configure the
auth
RADIUS server for RADIUS-based login.
The following commands are available in the login:auth context.
•
server
on page 170
•
primary
on page 170
•
authset
on page 171
•
move
on page 171
•
radtest_login
on page 172
server
Use the
command to select a RADIUS server. The
server
login:auth context.
server ( # | name )
no server ( # | name )
Parameters
#
name
Examples
The following example selects a radius server by name:
WLC.siemens.com
primary
Use the
command to set the RADIUS server as the primary server for authentication. Use the
primary
no form of the command to disable it. The
primary server_name
SCALANCE WLC711 CLI Reference Guide
:login# apply
Specifies the index number of the RADIUS server to be used
Specifies the name of the RADIUS server to be used
:login:auth# server rad2
primary
command is available from the
server
command is available from the login:auth context.
login Commands
auth
170
Advertisement
Table of Contents
