Siemens scalance WLC711 Reference Manual page 348

port port name
Parameters
port name
Example
Example code is not currently available.
show
Use the command to show layer 2 information about the specified topology. The
show
is available from the topology:<named-topology>:l2 context of the CLI for b@ac, b@ap, and routed
topologies.
show
Parameters
None
Example
This example shows layer 2 information for a b@ac topology named briAC_test:
WLC.siemens.com
Port: esa0
VLAN tagging: enable
VLAN ID: 333
Foreign Port: esa0
tagged
Use the command to enable or disable 802.1Q VLAN tagging. The
tagged
available from the topology:<named-topology>:l2 context of the CLI for b@ap, b@ac, and physical
topologies.
tagged enable | disable
Parameters
enable
disable
Example
Example code is not currently available.
SCALANCE WLC711 CLI Reference Guide
Specifies the name of the port.
:topology:briAC_test:l2# show
Indicates that 802.1Q VLAN tagging will be enabled.
Indicates that 802.1Q VLAN tagging will be disabled.
topology Commands
show
command
show
command is
tagged
348