Port; Service - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Usage
This command is visible only if a location-based service has been enabled via the
The default multicast address is 00:00:00:00:00:00
Examples
The following example sets the multicast address of the Ekahau server to 01:18:8e:00:00:00:
WLC.siemens.com
WLC.siemens.com
port
Use the
command to set the location-based server port address. The
port
from the lbs context of the CLI.
port 0-65535
Parameters
0-65535
Usage
This command is visible only if a location-based service has been enabled via the
The default port address is 00
Examples
The following example sets the port address of the Ekahau server to 06:
WLC.siemens.com
WLC.siemens.com
service
Use the
command to enable or disable an AeroScout or Ekahau location-based service on the
service
Wireless Appliance. The
service disable | aeroscout | ekahau
SCALANCE WLC711 CLI Reference Guide
:lbs# service ekahau
:lbs# multicast 01:18:8e:00:00:00
Specifies the port address of the location-based server. Enter at least 2 digits (for
example, 06 for port 6).
:lbs# service ekahau
:lbs# port 06
command is accessible from the lbs context of the CLI.
service
Location-Based-Service (lbs) Commands
service
command is accessible
port
service
port
command.
command.
378
Advertisement
Table of Contents
