Siemens scalance WLC711 Reference Manual page 398

custom
Use the command to enable or disable VNS customization (overwriting of defaults) by the
custom
RADIUS server.
The command is accessible from the site:<named-site> context.
custom
custom (enable | disable)
Parameters
enable | disable
Usage
The CLI <named-site> context must be in config mode for a RADIUS server to execute the
command. Use the
config mode.
Example
The following example enables VNS customization by the RADIUS server:
WLC.siemens.com
dns
Use the command to configure an IP address for a Domain Name Server for this site. The
dns
command is accessible from the site:<named-site> context.
dns A.B.C.D
Parameters
A.B.C.D
Usage
You must enter the
Example
The following example defines an IP address for the DNS:
WLC.siemens.com
WLC.siemens.com
local-radius
Use the
local-radius
server for this site. The
SCALANCE WLC711 CLI Reference Guide
Enables or disables VNS customization (overwriting of defaults) by the server.
command to enter config mode. Use
config radius name
:site:site1# custom enable
Specifies the IP address of the Domain Name Server for <named-site>.
command for the DNS setting to take affect.
apply
:site:site1# dns 192.168.001.002
:site:site1# apply
command to enable or disable authentication by the defined local RADIUS
command is accessible from the site:<named-site> context.
local-radius
site Commands
custom
custom
to exit
config exit
dns
398