Siemens scalance WLC711 Reference Manual page 180

Example
The following example sets radio 1 to be used:
WLC.siemens.com
WLC.siemens.com
security-scan
Use the
security-scan
After you run the
security-scan
security-scan (enable | disable)
Parameters
enable
disable
Example
The following example enables security scanning:
WLC.siemens.com
WLC.siemens.com
start
Use the command to start any enabled scanning.
start
After you run the
start
start
Parameters
None
Example
The following example starts the scanning:
WLC.siemens.com
WLC.siemens.com
type
Use the command to modify the scan type — active or passive.
type
After you run the
type
type active|passive
Parameters
SCALANCE WLC711 CLI Reference Guide
:mitigator:scgroup:South Block# radio1
:mitigator:scgroup:South Block# apply
command to enable or disable security scanning for rogue APs.
command, run the
Enables security scanning for rogue APs.
Disables security scanning for rogue APs.
:mitigator:scgroup:South-Block# security-scan enable
:mitigator:scgroup:South Block# apply
command, run the
apply
:mitigator:scgroup:South-Block# start
:mitigator:scgroup:South Block# apply
command, run the
apply
command to implement the change.
apply
command to start the scanning.
command to implement the change.
Radar Commands
security-scan
180