Siemens scalance WLC711 Reference Manual page 331

Usage
This command is only available when either the 802.11e or
more information, see
Example
The following example enables global admission control for voice for the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Use Global Admission Control for Voice (VO): enable
remoteable
Use the
remoteable
The command is accessible from the wlan:<WLAN-service-name> context of the CLI.
remoteable
After you run the
remoteable
remoteable enable | disable
Parameters
enable | disable
Example
The following example enables the SSID advertisement for the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Remote Service: enable
rf
The command moves you to the wlan:<WLAN-service-name>:rf context, which contains commands
rf
to configure RF options for the WLAN service.
The following commands are available in the wlan:<WLAN-service-name>:rf context.
•
11h-power-reduction
•
11h-support on page 332
•
11k-beacon-rep
•
11k-quiet-ie
•
11k-support
•
energy-save-mode
•
process-client-ie
SCALANCE WLC711 CLI Reference Guide
dot11e on page 324 and
:wlans:CNL-7-CP:qos-policy# voice-admission-control enable
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show voice-admission-control
command to enable or disable the SSID advertisement to the mobility domain.
command, run the
Enables or disables the SSID advertisement to the mobility domain.
:wlans:CNL-7-CP# remoteable enable
:wlans:CNL-7-CP# apply
:wlans:CNL-7-CP# show remoteable
on page 332
on page 334
on page 334
commands have been enabled. For
wmm
wmm on page 329.
command to implement the changes.
apply
wlans Commands
remoteable
331