Siemens scalance WLC711 Reference Manual page 255

11
12
Examples
The following example sets the RADIUS MAC address format to XX:XX:XX:XX:XX:XX:
WLC.siemens.com
rename
Use the command to rename the RADIUS server. The
rename
vnsmode:radius context of the CLI.
rename radius-name new-name radius-name
Parameters
radius-name
new-name
radius-name
Examples
The following example renames the RADIUS server ADV to IAV:
WLC.siemens.com
service-type-login
Use the
service-type-login
login. The
service-type-login
service-type-login (enable | disable)
Parameters
enable
disable
Usage
This command allows you to optionally set the RADIUS Access-Request and Accounting-Request
Service-Type attribute to Login. The default service type is Framed. Setting the Service-Type to Login
conflicts with the controller administrative RADIUS login since the administrative login also sets the
Service-Type to Login. If administrative RADIUS login is enabled, Service-Type set to Login will be
blocked and vice versa.
SCALANCE WLC711 CLI Reference Guide
Specifies a MAC address format of xxxxxx-xxxxxx for use with the RADIUS server
Specifies a MAC address format of xx xx xx xx xx xx for use with the RADIUS server
:vnsmode:radius# radius-mac-format 2
Specifies the existing name of the RADIUS server.
Identifies that the following characters are to be the new name for the RADIUS
server.
Specifies the new name of the RADIUS server.
:vnsmode:radius# rename ADV new-name IAV
command to enable or disable setting the service type attribute to
command is accessible from the vnsmode:radius context of the CLI.
Enables the defer accounting start feature.
Disables the defer accounting start feature.
VNS Commands (vnsmode)
command is accessible from the
rename
rename
255