•
adhoc
on page 188
•
aplist
on page 188
•
show
on page 197
•
show
on page 197
•
blacklist-timer
on page 189
•
show
on page 197
•
dosa
on page 192
•
drop-faf
on page 192
•
external-friendly
•
external-honeypot
•
internal-honeypot
•
adhoc
on page 188
•
name
on page 194
•
port
on page 194
•
rogue
on page 195
•
rogue-prevent
on page 195
•
spoofed-ap
on page 196
•
show
on page 197
adhoc
Use the
command to enable or disable removal of network access from clients in adhoc mode.
adhoc
The
command is accessible from the mitigator:scprof:<named scan profile> context and the
adhoc
mitigator:gsprof:<named guardian scan profile> context of the CLI.
After you run the
adhoc
adhoc (enable | disable)
Parameters
enable
disable
Example
The following example enables ad hoc client removal:
WLC.siemens.com
WLC.siemens.com
aplist
Use the
command to modify the list of the Wireless APs that are part of the scan group or scan
aplist
profile. Use the no form of the command to delete the Wireless APs from the list. The
command is accessible from the mitigator:scgroup:<named scan group> context, the
SCALANCE WLC711 CLI Reference Guide
on page 193
on page 193
on page 193
command, run the
apply
Enables removal of adhoc clients on this profile from network access
Disables removal of adhoc clients on this profile from network access
:mitigator:scprof:scp_name# adhoc enable
:mitigator:scprof:scp_name# apply
command to implement the change.
Radar Commands
adhoc
aplist
188