Key - Siemens scalance WLC711 Reference Manual

Parameters
filename
number
Examples
The following command imports the controller's configuration from a 'zipped' .zip file that was
exported from the previous platform or from the older software:
WLC.siemens.com
The following command removes the controller's import configuration, CDRS, logs, audit information
file:
WLC.siemens.com

key

Move to the key: context to configure license key information for the Wireless Appliance.
The key context has the following commands:
•
activate on page 37
•
ecap on page 38
activate
Use the
activate
command is accessible from the key context of the CLI.
activate activation-key
Parameters
activation-key
Example
The following example applies a license key on the Wireless Appliance:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
The name of the .zip or .cli file that contains the controller's configuration. If
the export file is located on a flash drive, the string "(flash)" must be
suffixed to the end of the specified file name.
Specifies the index number of the import file. You can use the show
import command to find the restore file's index number.
# import lab-213-g.11042008.141154.zip
# no import lab-213-g.11042008.141154.zip
command to apply a license key on the Wireless Appliance. The
Specifies the license key to be applied on the Wireless Appliance. The license
key format is: AAAAAAA-11111111-11111111-11111111-11111111.
:key# activate ABCDEFG-12345678-22345678-32345678-42345678
root Commands
key
activate
37