Siemens scalance WLC711 Reference Manual page 324

dot11e
Use the command to enable or disable 802.11e radio QoS support. The
dot11e
accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
dot11e
dot11e enable | disable
Parameters
enable | disable
Example
The following example enables 802.11e support on the Wireless Appliance:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
802.11e: enable
WLC.siemens.com
downlink
Use the
downlink
command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
downlink
downlink downgrade | drop | do-nothing
Parameters
downgrade
drop
do-nothing
Example
The following example defines the QoS downlink policy to drop the transmission's data packets when a
TSPEC violation is discovered:
WLC.siemens.com
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
command, run the
Specify to enable or disable 802.11e radio QoS support
:wlans:CNL-7-CP:qos-policy# dot11e enable
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show dot11e
:wlans:CNL-7-CP:qos-policy#
command to manage downlink policer action for this WLANS. The
command, run the
Specifies that the transmission's data packets are forced to be downgraded to the
next priority when a TSPEC violation is discovered.
Specifies that the transmission's data packets are forced to be dropped when a
TSPEC violation is discovered.
Specifies that the TSPEC violations are allowed to continue when they are
discovered. Data transmissions will continue and no action is taken against the
violating transmissions.
:wlans:CNL-7-CP:qos-policy# downlink drop
:wlans:CNL-7-CP:qos-policy# apply
command to implement the changes.
apply
command to implement the changes.
apply
wlans Commands
dot11e
command is
dot11e
downlink
324