Siemens scalance WLC711 Reference Manual page 388

sync
Use the sync command to enable or disable automatic synchronization of this <named-cos> across
paired controllers. Refer to the section entitled "Using the Sync Summary," in the Wireless User Guide
for more information about synchronization of CoS.
The command is accessible from within the cos:<named-cos> context.
sync
sync {enable | disable}
Parameters
enable | disable
Examples
The following example enables the synchronization of the my-cos CoS across controllers:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Name: my-cos
Use Legacy Priority Override defined in the WLAN Service: disable
802.1p Priority: none
ToS/DSCP Marking:
Mask:
Inbound Rate Limit:
Outbound Rate Limit:
Transmit Queue: none
Synchronize: enable
WLC.siemens.com
use-wlan-marking
Use the use-wlan-marking command to enable or disable WLAN (ToS/DSCP) marking in WLAN
service.
The
use-wlan-marking
use-wlan-marking {enable | disable}
Parameters
enable
disable
Usage
When WLAN marking is enabled, the WLAN service applies legacy priority override settings defined in
WLAN Quality of Service (QoS) tables to received packets before sending them on.
SCALANCE WLC711 CLI Reference Guide
Enables or disables automatic synchronization of this <named-cos> across paired
controllers.
:cos:my-cos# sync enable
:cos:my-cos# apply
:cos:my-cos# show
:cos:my-cos#
command is accessible from within the cos:<named-cos> context.
Enables WLAN service to use the legacy priority value taken from the WLAN.
Disables WLAN service from applying the legacy priority taken from the WLAN; the
priority value of this CoS is used instead. This is the default.
cos Commands
sync
388