Siemens scalance WLC711 Reference Manual page 263

create profile_name average rate
Parameters
profile_name
average rate
Examples
The following example creates a bandwidth rate control profile named lowspeed with 200 Kbps of CIR:
WLC.siemens.com
The following example creates a bandwidth rate control profile named high speed with 700 Kbps of
CIR:
WLC.siemens.com
delete
Use the command to delete a bandwidth rate control profile. The
delete
accessible from the vnsmode:rateprofile context of the CLI.
If the rate control profile that you are attempting to delete is being used by any other VNS, the system
returns the following message: You can not delete this profile because it is used by other VNS.
delete profile_name
Parameters
profile_name
Example
The following example deletes the lowspeed profile:
WLC.siemens.com
show
Use the command to display all existing bandwidth rate control profiles or a specific profile.
show
show [profile_name]
Parameters
profile_name
SCALANCE WLC711 CLI Reference Guide
Specifies the name of the rate control profile. If you are using a profile name that
consists of two words and the two words are separated by space, you must put the
profile name in double quotes (").
Specifies committed information rate (CIR) in Kbps. Average Rate (CIR) must be
between 128 and 200000 (kbps).
:vnsmode:rateprofile# create lowspeed 200
:vnsmode:rateprofile# create "high speed" 700
Specifies the name of the bandwidth rate control profile to delete.
:vnsmode:rateprofile# delete lowspeed
Specifies the name of a specific rate control profile to display.
VNS Commands (vnsmode)
delete
command is
delete
263