Siemens scalance WLC711 Reference Manual page 373

from the topology group. Different sessions may be assigned to a different topology in a topology
group.
The following commands are available in the topology:topology-group context.
•
create on page 373
•
delete on page 373
•
show on page 373
•
<topology-group-name>
create
Use the command to create a topology group object. The
create
the topology group context of the CLI.
create topology-group-name first-group-member(b@ac | routed) vlanid
Parameters
topology-group-name
first-group-member
b@ac
routed
vlanid
Example
delete
Use the command to delete a topology group object. The
delete
the topology group context of the CLI.
delete topology-group-name
Parameters
topology-group-name
Example
show
Use the command to display information about a topology group. The
show
from the topology:topology-group context of the CLI.
show
SCALANCE WLC711 CLI Reference Guide
on page 374 to specify a name for this topology group
Specifies the name of the topology group.
Specifies the first topology group member.
Specifies a Bridge Traffic locally at Controller topology for this group.
Specifies a routed topology for this group.
VLAN ID assigned to this topology group. Value can be in range 1-4094.
Specifies the name of the topology group.
topology Commands
command is accessible from
create
command is accessible from
delete
command is available
show
create
373