Siemens scalance WLC711 Reference Manual page 189
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
mitigator:scprof:<named scan profile> context, and the mitigator:gsprof:<named guardian scan profile>
context of the CLI.
After you run the
aplist
aplist [(add|delete)] serial[, serial]*
Parameters
add | delete
serial[, serial]*
Usage
Use the add or delete option to make changes to an existing scan profile AP list. You can replace the
APs listed in the scan profile by omitting the add or delete option, and listing the APs you want.
Example
The following example adds a Wireless AP with the serial number 500006072051354 to the scan
profile:
WLC.siemens.com
WLC.siemens.com
The following example deletes a Wireless AP with the serial number 500006072051354 from the scan
profile:
WLC.siemens.com
WLC.siemens.com
The following example replaces the Wireless APs in the scan profile with those with the following serial
numbers: 500006072051354, 500005380080168, and 0500006072051427:
WLC.siemens.com
0500006072051427, 500005380080168
WLC.siemens.com
blacklist-timer
Use the
blacklist-timer
blacklisted. The
blacklist-timer
profile> context and the mitigator:gsprof:<named guardian scan profile> context of the CLI.
The
blacklist-timer
originating DoS attacks) is enabled.
After you run the
blacklist-timer
SCALANCE WLC711 CLI Reference Guide
command, run the
apply
Add or delete the (following) APs from the scan profile. If you omit these
options, by default all APs in the scan profile are replaced with the APs listed
in this command.
Specifies the Wireless AP by their serial numbers that are to be added to the
scan profile. They can be added or deleted individually, or listed as a comma
and space separated list.
:mitigator:scprof:scp_name# aplist add 500006072051354
:mitigator:scprof:scp_name# apply
:mitigator:scprof:scp_name# aplist delete 500006072051354
:mitigator:scprof:scp_name# apply
:mitigator:scprof:scp_name# aplist 500006072051354,
:mitigator:scprof:scp_name# apply
command to configure the maximum amount of time a device can be
command is accessible from the mitigator:scprof:<named scan
command takes effect after dosa (which removes network access from clients
command, run the
command to implement the change.
command to implement the change.
apply
Radar Commands
blacklist-timer
189
Advertisement
Table of Contents
