Siemens scalance WLC711 Reference Manual page 357

A.B.C.D
none
Example
Example code is not currently available.
lease-default
Use the
lease-default
assigned by the DHCP server to a wireless device. The
topology:<named-topology>:l3:dhcp context of the CLI for b@ac, physical, and routed topologies. This
command is visible only when mode is set to local. See
After you run the
lease-default
lease-default int
Parameters
int
Example
The following example sets the default lease time to 34000 seconds:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
lease-max
Use the
lease-max
assigned by the DHCP server to a wireless device. The
topology:<named-topology>:l3:dhcp context of the CLI for b@ac, physical, and routed topologies. This
command is visible only when mode is set to local. See
After you run the
lease-max
lease-max int
Parameters
int
SCALANCE WLC711 CLI Reference Guide
Specifies the IP address of the remote Wireless Appliance.
Clears the IP address of the remote Wireless Appliance.
command to set the default time limit, in seconds, that an IP address would be
command, run the
Specifies the time limit in seconds.
:topology:routed2:l3:dhcp# mode local
:topology:routed2:l3:dhcp# lease 34000
:topology:routed2:l3:dhcp# apply
command to set the maximum time limit, in seconds, that an IP address would be
command, run the
Specifies the time limit in seconds.
command is available from the
lease-default
mode on page 358.
command to implement the changes.
apply
command is available from the
lease-max
mode on page 358.
command to implement the changes.
apply
topology Commands
lease-default
357