Siemens scalance WLC711 Reference Manual page 250

•
show on page 253
•
radius-accounting
•
radius-mac-format
•
rename on page 255
•
service-type-login
•
strict on page 256
•
usage-mode on page 256
•
<named_RADIUS_server>
context.
create
Use the command to create a RADIUS server configuration. The
create
accessible from the vnsmode:radius context of the CLI.
create name A.B.C.D secret
Parameters
name
A.B.C.D
secret
Examples
The following example creates and then displays the details of a RADIUS server configuration named
test-radius-server with an IP address of 10.10.10.10 and a shared secret of "test":
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Authentication port: 1812
Accounting port: 1813
Authentication priority: 5
Accounting priority: 5
Authentication total number of tries: 3
Accounting total number of tries: 3
Authentication RADIUS request timeout: 5
Accounting RADIUS request timeout: 5
Interim accounting interval: 0
Default protocol: PAP
Shared secret: ****
Name: test-radius-server
defer-acct-start
Use the
defer-acct-start
request until the client's IP address is known. The
vnsmode:radius context of the CLI.
SCALANCE WLC711 CLI Reference Guide
on page 254
on page 254
on page 255
on page 256 — See for commands in the vnsmode:radius:<server-name>
Specifies the name of the RADIUS server
Specifies the IP address of the RADIUS server
Specifies the shared secret for the RADIUS server
:vnsmode:radius# create test-radius-server 10.10.10.10 test
:vnsmode:radius# test-radius-server
:vnsmode:radius:test-radius-server# show
command to enable or disable defering sending the accounting start
VNS Commands (vnsmode)
create
command is accessible from the
defer-acct-start
create
command is
250