Siemens scalance WLC711 Reference Manual page 322

WLC.siemens.com
Key Management Options: both
psk
Use the command to configure a pre-shared key in a dynamic mesh or WDS WLAN service. The
psk
command is accessible from the wlan:<WLAN-service-name> context of the CLI for a dynamic
psk
mesh or WDS WLAN service.
After you run the
psk
psk shared-secret
Parameters
shared-secret
Usage
After this command has been used to configure the pre-shared key for a WLAN service, it will no longer
be avaiable.
Example
The following example configures the pre-shared key for the WDS WLAN service wds-test as
testsecret:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Service type: wds
Pre-shared Key: testsecret
Name: wds-test
Enable status: enable
Pre-shared Key: testsecret
SSID: wdstest
WLC.siemens.com
qos-policy
The command moves you to the wlan:<WLAN-service-name>:qos_policy context, which
qos-policy
provides commands for the configuration of QoS support options for the WLAN service.
The following commands are available in the wlan:<WLAN-service-name>:qos_policy context.
•
dot11e on page 324
•
downlink on page 324
•
flex-client-access
•
legacy on page 325
SCALANCE WLC711 CLI Reference Guide
:wlans:test:priv# show wpa-v2-key-mgmt
command, run the
apply
Specify a pre-shared key for this dynamic mesh or WDS WLAN service with a key
length of between 8 and 63 characters
# wlans
:wlans# wds-test
:wlans:wds-test# psk testsecret
:wlans:wds-test# apply
:wlans:wds-test# show
:wlans:wds-test#
on page 325
command to implement the changes.
wlans Commands
psk
322