Siemens scalance WLC711 Reference Manual page 397

The following example assigns a WLAN to site1 for Radio1:
WLC.siemens.com
band-preference
Use the band-preference command to enable or disable this site as a band preferencing load group.
Refer to the Wireless User Guide for a detailed description of radio band preferencing.
The
band-preference
band-preference enable | disable
Parameters
enable | disable
Example
The following example enables band preferencing on site1:
WLC.siemens.com
config
Use the command to configure a RADIUS server as the local authentication server for APs
config
assigned to this site. The
config radius name [prot (CHAP|PAP|MS-CHAP|MS-CHAP2)] | exit
Parameters
radius name
prot CHAP|PAP|MS-CHAP|
MS-CHAP2
exit
Usage
Enter
config radius name
mode.
Example
The following example assigns RADIUS server R-1 to site1, and enters config mode for R-1:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:site:site1# assign-wlan WirelessWLAN radio1
command is accessible from within the site:<named-site> context.
Enables or disables band preferencing for this site.
:site:site1# band-preference enable
command is accessible from the site:<named-site> context.
config
Specifies the RADIUS server to be assigned to this site, and enters config mode for
the named server.
Specifies the authentication protocol to be used with this RADIUS server.
Values are CHAP, PAP, MS-CHAP, and MS-CHAP2.
Exits config mode.
to enter config mode for that server. Enter
:site:site1# config R-1
site Commands
band-preference
to exit config
config exit
397