Siemens scalance WLC711 Reference Manual page 186

Example
The following example adds friendly AP "testing" by its BSSID: 11:11:22:22:33:33 on channel 5:
WLC.siemens.com
testing channel 5 desc testing
WLC.siemens.com
The following example deletes an AP with BSSID: 11:11:22:22:33:33 from friendly status:
WLC.siemens.com
WLC.siemens.com
prohibited-ap
Use the
prohibited-ap
identified in this context by their BSSID (Basic Service Set ID), which is the same as their MAC address.
The
prohibited-ap
After you run the
prohibited-ap
prohibited-ap (bssid [desc string] [category string]) | (bssid delete)
Parameters
bssid
desc string
category string
delete
Example
The following example makes testap1 with BSSID: 11:11:22:22:33:33 prohibited due to the prohibitedap
category:
WLC.siemens.com
testap1 category prohibitedap
WLC.siemens.com
The following example removes the AP with BSSID: 11:11:22:22:33:33 from prohibited status:
WLC.siemens.com
WLC.siemens.com
reclassify
Use the
reclassify
context by their BSSID (Basic Service Set ID), which is the same as their MAC address. The
command is accessible from the mitigator:maintenance context of the CLI.
SCALANCE WLC711 CLI Reference Guide
:mitigator:maintenance# friendly-ap 11:11:22:22:33:33 ssid
:mitigator:maintenance# apply
:mitigator:maintenance# friendly-ap 11:11:22:22:33:33 delete
:mitigator:maintenance# apply
command to add, update, or remove an AP from prohibited status. APs are
command is accessible from the mitigator:maintenance context of the CLI.
command, run the
The MAC address of the AP.
An optional alphanumeric character string describing the AP.
The optional category defines the reason the AP is prohibited. Valid values are:
prohibitedap, internalhoneypot, and externalhoneypot
Removes the AP identified by the BSSID from prohibited AP status.
:mitigator:maintenance# prohibited-ap 11:11:22:22:33:33 desc
:mitigator:maintenance# apply
:mitigator:maintenance# prohibited-ap 11:11:22:22:33:33 delete
:mitigator:maintenance# apply
command to modify the state of one or more APs. APs are identified in this
command to implement the change.
apply
Radar Commands
prohibited-ap
reclassify
186