Radtest_Mba - Siemens scalance WLC711 Reference Manual

Parameters
vns_name
username
password
Examples
The following example tests the radius server on CNL-7-CP:
WLC.siemens.com
Sending Captive portal authentication request to Radius Server for user
chap106, with password xyz789, on vns_name CNL-7-CP.
Please wait while all configured Radius Servers on this VNS are attempted as
needed ...
Test Completed.
The Radius Server has successfully authenticated the user chap106 with
password xyz789 and VNS CNL-7-CP.

radtest_mba

Use the
radtest_mba
authorization.
radtest_mba vns_name | MAC Address | ap_bss_mac_addr | ap_eth_mac_addr
Parameters
vns_name
MAC Address
ap_bss_mac_addr
ap_eth_mac_addr
Examples
The following example tests the RADIUS server on CNL-206-CPWEP:
WLC.siemens.com
Sending MAC-based authorization request to Radius Server for mac_str 00:0E:
35:CA:D1:96 on vns_name CNL-206-CPWEP with bss_mac DE:AD:DE:AD:DE:AD and
eth_mac DE:AD:DE:AD:DE:AD.
Please wait while all configured Radius Servers on this VNS are attempted as
needed ...
Test Completed.
SCALANCE WLC711 CLI Reference Guide
Specifies the VNS assignment ID of the virtual interface (WLAN Service) configured
on the controller.
Specifies a username.
Specifies a password.
# radtest CNL-7-CP chap106 xyz789
command to test RADIUS servers used by the Wireless Appliance for Mac-based
Specifies the VNS assignment ID of the virtual interface (WLAN Service)
configured on the controller.
Specifies a MAC address.
Specifies the Wireless AP's Basic Service Set Identifier (BSSID).
Specifies the Wireless AP's ethernet MAC address.
# radtest_mba CNL-206-CPWEP 00:0E:35:CA:D1:96
root Commands
radtest_mba
40