Siemens scalance WLC711 Reference Manual page 286

•
mac-allow-unauthorized
•
mac-roam on page 301
•
mode on page 302
•
move on page 303
•
nasid on page 304
•
nasip on page 304
•
password on page 305
•
protocol on page 306
•
radius-timeout-policy
•
remove on page 307
•
show on page 307
•
use-policy-zone
•
vsa-ap on page 308
•
vsa-egress on page 309
•
vsa-ingress on page 309
•
vsa-policy on page 310
•
vsa-ssid on page 311
•
vsa-topology on page 311
•
vsa-vns on page 312
aaa-redir
Use the
aaa-redir
After you run the
aaa-redir
aaa-redir enable | disable
Parameters
enable | disable
Usage
The 8021x authentication mode must be set for this command to be available. For more information,
see mode on page 302.
Example
The following example enables AAA redirect:
WLC.siemens.com
WLC.siemens.com
access-reject-without-cui
Use the
access-reject-without-cui
without Chargeable-User-Identity attribute as Access-Reject. The
command is accessible from the wlans -> <named wlans> -> auth context of the CLI.
SCALANCE WLC711 CLI Reference Guide
on page 301
on page 306
on page 308
command to enable or disable AAA redirect.
command, run the
Specify to enable or disable AAA redirect
:wlans:cnl-AAA:auth# aaa-redir enable
:wlans:cnl-AAA:auth# apply
command to enable or disable treatment of Access-Accept
command to implement the changes.
apply
access-reject-without-cui
wlans Commands
aaa-redir
286