Siemens scalance WLC711 Reference Manual page 71

ntpip 1 192.168.4.84
ntpip 2 192.168.4.89
ntpip 3 200.200.200.200
tz America/Montreal
show topology
Use the
show topology
show topology l3
Parameters
l3
Usage
You can identify an IP using its interface name or, for short, the identifier returned by the
command. Interface name is the name of any topology with L3 configuration (Physical,
topology l3
Admin, B@AC or Routed).
Examples
Example code is not currently available.
show traffic_capture
Use the
show traffic_capture
show traffic_capture
Parameters
None
Examples
The following is the example of the status display when the traffic capture is running:
WLC.siemens.com
Interface:
Size: 1000(MB).
Filename: mgmt_traffic_dump.cap
Destination: local
Capture Status: stopped
Traffic Capture Files:
1:mgmt_traffic_dump.cap
SCALANCE WLC711 CLI Reference Guide
command to display the IDs and names of IP interfaces.
Displays only topologies with an L3 configuration. The topologies are listed by
index number.
command to display the status of traffic capture.
# show traffic_capture
root Commands
show topology
show
71