Siemens scalance WLC711 Reference Manual page 152

middleantenna-radio2
Use the
middleantenna-radio2
command is accessible from the <serial> context of the CLI if the AP supports configuration of a right
antenna. To display a list of the available antenna models, enter the command without arguments. The
middleantenna-radio2
for AP models that support the Professional Install feature,
from the ap:<serial>:professional_antenna# context.
The antenna commands available are dependent on the AP type.
middleantenna-radio2 antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
middleantenna-radio2 <antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT01 AG 4dBi Omni Factory
No Antenna
WLC.siemens.com
Omni Factory
This example removes a configured middle antenna for radio2:
WLC.siemens.com
move
Use the command to change the rank of Wireless Appliances on the Wireless Appliance list. The
move
command is accessible from the ap:<serial> context of the CLI.
move
move aclist rank1 + | - rank2
Parameters
rank1
+ | -
rank2
SCALANCE WLC711 CLI Reference Guide
command to select an antenna supported by the Wireless AP. This
command is accessible from the ap:<serial> context of the CLI. Additionally,
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# middleantenna-radio2Usage:
:ap:0500010032150135# middleantenna-radio2 WS-ANT01 AG 4dBi
:ap:0500010032150135# middleantenna-radio2 No Antenna
Specifies the rank of the listed item to be moved
Move rank one position above or below the rank2 item
Specifies the rank of the second item
middleantenna-radio2
middleantenna-radio2
ap Commands
is also accessible
152