Siemens scalance WLC711 Reference Manual page 235

•
auto-login on page 235
•
egress-filtering
•
flex-client-access
•
hybrid-policy on page 236
•
max-video-assoc
•
max-video-reassoc
•
max-voice-assoc
•
max-voice-reassoc
•
tg-selection
•
vlan-policy on page 241
auto-login
Use the
auto-login
command is accessible from the vnsmode:adminctr context of the CLI. Many devices such as those
made by Apple implement an autologin feature that prompts the user to login as soon as the device
detects the presence of a Captive Portal. These features sometimes cause problems for users who
actually interact with the captive portal.
auto-login redirect | drop | hide
Parameters
redirect
drop
hide
Examples
The following example sets auto-login to drop detection messages:
WLC.siemens.com
egress-filtering
Use the
egress-filtering
command is accessible from the vnsmode::adminctr context of the CLI.
filtering
egress-filtering on | off | wlan
SCALANCE WLC711 CLI Reference Guide
on page 235
on page 236
on page 238
on page 239
on page 239
on page 240
command to configure global client Auto-Login behavior. The
Redirect detection messages to the Captive Portal. This option allows
client autologin to detect the captive portal and prompt the user to
login. This option may cause post-authentication redirection to fail.
Drop detection messages.
Hides the captive portal from Autologin detector. This is the default
option. This option provides the most control over the captive portal
experience.
:vnsmode:adminctr# auto-login drop
command to enable or disable egress filtering globally. The
VNS Commands (vnsmode)
auto-login
auto-login
egress-
235