Siemens scalance WLC711 Reference Manual page 151

Parameters
location
no location
Usage
This command supports the use of Unicode (UTF-8) strings. If the location string includes more than
one word, you must enclose the string in double quotation marks.
Example
Example code is not currently available.
middleantenna-radio1
Use the
middleantenna-radio1
command is accessible from the <serial> context of the CLI if the AP supports configuration of a middle
antenna. To display a list of the available antenna models, enter the command without arguments. The
middleantenna-radio1
for AP models that support the Professional Install feature,
from the ap:<serial>:professional_antenna# context.
The antenna commands available are dependent on the AP type.
middleantenna-radio1 antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
middleantenna-radio1 <antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT02 AG 4dBi Omni Factory
No Antenna
WLC.siemens.com
Omni Factory
This example removes a configured middle antenna for radio1:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Assign an existing location or a new location
Remove the location
command to select an antenna supported by the Wireless AP. This
command is accessible from the ap:<serial> context of the CLI. Additionally,
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# middleantenna-radio1 Usage:
:ap:0500010032150135 middleantenna-radio1 WS-ANT02 AG 4dBi
:ap:0500010032150135# middleantenna-radio1 No Antenna
middleantenna-radio1
middleantenna-radio1
ap Commands
is also accessible
151