Siemens scalance WLC711 Reference Manual page 259
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
0-65535
Examples
The following example sets the port for RADIUS authentication to port 1816 for the RADIUS server
named RAD1:
WLC.siemens.com
auth-prio
Use the
auth-prio
is accessible from the vnsmode:radius:<named_ RADIUS_server> context of the CLI.
auth-prio 0-32
Parameters
0-32
Examples
The following example sets the RADIUS authentication priority to 5 for the RADIUS server named RAD1:
WLC.siemens.com
auth-retries
Use the
auth-retries
command is accessible from the vnsmode:radius: <named_RADIUS_server> context of
auth-retries
the CLI.
auth-retries 1-32
Parameters
1-32
Examples
The following example sets the number of RADIUS authentication attempts to 5 for the RADIUS server
named RAD1:
WLC.siemens.com
auth-timeout
Use the
auth-timeout
command is accessible from the vnsmode:radius:<named_ RADIUS_server> context of the CLI.
SCALANCE WLC711 CLI Reference Guide
Specifies the RADIUS authentication port.
:vnsmode:radius:RAD1# auth-port 1816
command to set the priority for RADIUS authentication. The
Specifies the RADIUS authentication priority.
:vnsmode:radius:RAD1# auth-prio 5
command to set the the total number of RADIUS authentication attempts. The
Specifies the total number of RADIUS authentication attempts.
:vnsmode:radius:RAD1# auth-retries 5
command to set the timeout for RADIUS authentication. The
VNS Commands (vnsmode)
auth-prio
command
auth-prio
auth-timeout
259
Advertisement
Table of Contents
