Siemens scalance WLC711 Reference Manual page 26
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Parameters
A.B.C.D
primary | secondary
Examples
WLC.siemens.com
pairip
Use the
command to specify the backup of the Wireless Appliance's IP address.
pairip
pairip A.B.C.D
Parameters
A.B.C.D
Examples
The following example sets an IP address for the backup Wireless Appliance:
WLC.siemens.com
pairrole
Use the
pairrole
availability Link Exchange or as the secondary point.
When a Wireless Appliance is set as the secondary connection point, Wireless AP registration requests
will be set to pending until the other Wireless Appliance is set up as the primary connection point.
pairrole primary | secondary
Parameters
primary
secondary
Examples
The following example sets the current Wireless Appliance to be the primary connection point:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Specifies the IP address of the peer Wireless Appliance in the availability
pair.
Specifies if the Wireless Appliance is the primary or secondary controller in
the pair.
:availability# pair 123.321.24.54 primary
Specifies the IP address of the peer Wireless Appliance in the availability pair.
:availability# pairip 123.321.24.54
command to designate the Wireless Appliance as the primary connection point for
Assigns the primary connection point role.
Assigns the secondary connection point role.
:availability# pairrole primary
root Commands
pairip
26
Advertisement
Table of Contents
