Secmode; Mdismethod - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
backupMgr
IP Address
Examples
The following example adds an agent to the network:
WLC.siemens.com
The following example removes an agent from the network:
WLC.siemens.com
The following example approves an agent on the network:
WLC.siemens.com
The following example specifies 10.0.0.1 as backup manager agent on the network:
WLC.siemens.com
secmode
Use the
command to set the Security Mode to allow only approved Agents to connect to the
secmode
manager, or allow all agents to connect.
secmode (approved|none)
Parameters
approved
none
Examples
The following example configures the security mode to have no restrictions, allowing all agents to
connect to the manager:
WLC.siemens.com
mdismethod
Use the
mdismethod
mdismethod (slpd|static)
SCALANCE WLC711 CLI Reference Guide
Specifies the agent at the IP address as the network backup manager
Specifies the IP address of the agent
:mobility# agent add 10.0.0.1
:mobility# agent remove 10.0.2.4
:mobility# agent approve 10.0.0.1
:mobility# agent backupmgr 10.0.0.1
Allows only approved agents to connect to the manager
Allows all agents to connect to the manager
:mobility# secmode none
command to locate the Mobility Manager on the network.
mobility Commands
secmode
201
Advertisement
Table of Contents
