Siemens scalance WLC711 Reference Manual page 83

Examples
The following example modifies the status of a Wireless AP to pending:
WLC.siemens.com
The following example reboots the Wireless AP:
WLC.siemens.com
Rebooting selected AP may result in a localized service interruption. Are you
sure you want to continue(yes/no)?
(yes/no):yes
blacklist
The command moves you into the blacklist context, which contains commands to
blacklist
configure a MAC address list. If the MAC address list mode is black, the MAC addresses on the list
identify clients that are not allowed to associate with the AP (a "blacklist"). If the MAC list mode is
white, only the clients identified by the MAC addresses on the list are allowed to associate with the AP
(a "whitelist"). The
The following commands are available in the ap:blacklist context:
•
export on page 83
•
import on page 84
•
mac on page 84
•
mac-list-mode on page 85
export
Use the command to export the current MAC address list to a file. The
export
accessible from the ap:blacklist context of the CLI.
export server | user | dir | file
Parameters
server
user
dir
file
Examples
The following example exports the MAC address list to a file on a server:
WLC.siemens.com
MAClist.txt
Please input password:
Attempting to upload file...
SCALANCE WLC711 CLI Reference Guide
:ap# access 0409920201204003 pending
:ap# access 0500008043050355 reboot
command is accessible from the ap context of the CLI.
blacklist
Specifies the IP address of the server.
Specifies the username of an account on the server.
Specifies the directory containing the file.
Specifies the file name.
:ap:blacklist# export 192.168.1.6 mgrey /mgrey/home
ap Commands
blacklist
command is
export
83