Siemens scalance WLC711 Reference Manual page 290

A.B.C.D
port
Usage
Either the external authentication mode or 802.1x with aaa-redir must be set for this command to be
available. For more information, see
Example
The following example specifies the interface and server access port for access to an external
authentication server:
WLC.siemens.com
WLC.siemens.com
extredir
Use the
extredir
the External Redirection URL.
After you run the
extredir
extredir value_string | none
Parameters
value_string
none
Usage
The external authentication mode must be set for this command to be available. For more information,
see mode on page 302.
Example
The following example specifies an External Redirection URL:
WLC.siemens.com
192.168.4.89:80
WLC.siemens.com
extsecret
Use the
extsecret
define the Shared Secret password common to both the Wireless Appliance and the external web
server.
After you run the
extsecret
SCALANCE WLC711 CLI Reference Guide
Specifies the IP address of the controller's server access port for communication to
an external authentication server.
Specifies the port number within the range: 32768 - 65535
mode on page 302.
:wlans:CNL-7-CP:auth:captiveportal# extcpip 10.0.0.1:33333
:wlans:CNL-7-CP:auth:captiveportal# apply
command, within context wlan:<WLAN-service-name>:auth:captiveportal, to specify
command, run the
Specifies a URL beginning with http://
Specifies that no external redirection URL is configured
:wlans:CNL-7-CP:auth:captiveportal# extredir http://
:wlans:CNL-7-CP:auth:captiveportal# apply
command, within context wlan:<WLAN-service-name>:auth:captiveportal, to
command, run the
command to implement the changes.
apply
command to implement the changes.
apply
wlans Commands
extredir
290