Siemens scalance WLC711 Reference Manual page 356

foreign-gateway
Use the
foreign-gateway
configuration. The
topology>:l3:dhcp context of the CLI for routed topologies. This command is visible only when mode is
set to local. See mode
foreign-gateway A.B.C.D | none
Parameters
A.B.C.D
none
Example
The following example clears the IP address of the remote Wireless Appliance:
WLC.siemens.com
WLC.siemens.com
foreign-range
Use the
foreign-range
Appliance in a paired controller configuration. The
topology:<named-topology>:l3: dhcp context of the CLI for b@ac and routed topologies. This
command is visible only when mode is set to local. See
foreign-range A.B.C.D A.B.C.D
Parameters
A.B.C.D
A.B.C.D
Example
The following example specifies the IP address range:
WLC.siemens.com
WLC.siemens.com
gateway
Use the command to specify the gateway IP address. The
gateway
from the topology:<named-topology>:l3:dhcp context of the CLI for b@ac and physical topologies. For
information about the
gateway A.B.C.D | none
Parameters
SCALANCE WLC711 CLI Reference Guide
command to configure the remote Wireless Appliance in a paired controller
command is available from the topology:<named-
foreign-gateway
on page 358.
Specifies the IP address of the remote Wireless Appliance.
Clears the IP address of the remote Wireless Appliance.
:topology:routed1:l3:dhcp# mode local
:topology:routed1:l3:dhcp# foreign-gateway none
command to configure the DHCP pool of addresses for a remote Wireless
Specifies the first IP address in the IP address range.
Specifies the last IP address in the IP address range.
:topology:routed2:l3:dhcp# mode local
:topology:routed2:l3:dhcp# foreign-range 10.44.6.2 10.44.6.254
command for the Admin topology, see
gateway
command is available from the
foreign-range
mode on page 358.
gateway
gateway
topology Commands
foreign-gateway
command is available
on page 364.
356