Svcmsg; Syslogip - Siemens scalance WLC711 Reference Manual
Hide thumbs
Also See for scalance WLC711:
- Getting started (100 pages) ,
- Compact operating instructions (30 pages) ,
- Maintenance manual (73 pages)
Table of Contents
Advertisement
Examples
The following example enables station event logging:
WLC.siemens.com
svcmsg
Use the
command to enable DHCP messages. Use the no form of the command to disable
svcmsg
these and use log and traces messages only.
svcmsg
no svcmsg
Parameters
None
Examples
The following example enables service messages on the system:
WLC.siemens.com
Successfully turned on service messages.
The following example disables service messages:
WLC.siemens.com
Successfully turned off service messages.
syslogip
Use the
syslogip
to delete a server. Use show syslog to display system log levels. For more information, see
on page 68.
syslogip # IP Address [enable|disable]
no syslogip
Parameters
#
IP Address
enable
disable
SCALANCE WLC711 CLI Reference Guide
:syslog# stationevents enable
:syslog# svcmsg
:syslog# no svcmsg
command to configure up to three syslog servers. Use the no form of the command
Specifies the index number of the system log ID
Specifies the IP address to be configured. The IP address can be either IPv4
(A.B.C.D) or IPv6 (A:B:C:D:E:F:G:H) format.
Enables the server
Disables the server
syslog Commands
svcmsg
show syslog
222
Advertisement
Table of Contents
