Siemens scalance WLC711 Reference Manual page 105

Parameters
mmac
MAC Address
mip
MIP
muser
string
Examples
The following example searches for a client on the Wireless AP by its MAC address:
WLC.siemens.com
00:12:F0:81:A4:62
The following example searches for a client on the Wireless AP by its IP Address:
WLC.siemens.com
00:12:F0:81:A4:62
The following example searches for a client on the Wireless AP by specifying its User ID:
CNL205:ap# search muser mschap
00:12:F0:81:A4:62
serial
Use the command to add a Wireless AP to the Wireless Appliance. The
serial
accessible from the ap context of the CLI.
serial ap serial number | name | hardware type | ap role | description
Parameters
ap serial number
name
hardware type
ap role
description
Examples
The following example adds a Wireless AP to the Wireless Appliance:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
Indicates that MAC address will be specified.
Specifies the MAC address.
Indicates that an IP address will be specified.
Specifies the IP address.
Indicates that a User ID will be specified.
Specifies the User ID.
:ap# search mmac 00:12:F0:81:A4:62
172.28.209.251 mschap
:ap# search mip 172.28.209.251
172.28.209.251 mschap
172.28.209.251 mschap
Specifies the serial number of the Wireless AP.
Specifies a unique ID for the Wireless AP.
Specifies the hardware type of the Wireless AP.
Specifies the role of the Wireless AP — whether access point or sensor.
Specifies a descriptive word for the Wireless AP.
:ap# serial 0409920201203751 Orlandoe_4_P2 AP3805i ap
ap Commands
serial
command is
serial
105