Siemens scalance WLC711 Reference Manual page 328

Example
The following example overrides all existing Service Class settings and configures a single Service Class
of 4 for the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Service class: 4
turbo-voice
Use the
turbo-voice
command is accessible from the wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
turbo-voice
turbo-voice enable | disable
Parameters
enable | disable
Usage
This command is only active when either the wmm, 802.11e, or
Example
The following example enables Turbo Voice on the CNL-7-CP WLANS:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
Turbo voice: enable
uapsd
Use the command to enable Unscheduled Automatic Power Save Delivery (U-APSD) on the
uapsd
VNS. Use the no form of the command to disable it. The
wlan:<WLAN-service-name>:qos-policy context of the CLI.
After you run the
uapsd
uapsd enable | disable
Parameters
enable | disable
Usage
This command is only available when either the 802.11e or
information see dot11e
SCALANCE WLC711 CLI Reference Guide
:wlans:CNL-7-CP:qos_policy# priority-override-up 4
:wlans:CNL-7-CP:qos_policy# apply
:wlans:CNL-7-CP:qos_policy# show priority-override-up
command to enable or disable Turbo Voice optimization. The
command, run the
Enables or disables Turbo Voice optimization on the WLANS.
:wlans:CNL-7-CP:qos-policy# turbo-voice enable
:wlans:CNL-7-CP:qos-policy# apply
:wlans:CNL-7-CP:qos-policy# show turbo-voice
command, run the
apply
Enables or disables U-APSD. Default value: disabled.
on page 324 and wmm on page 329.
command to implement the changes.
apply
commands have been enabled.
legacy
command is accessible from the
uapsd
command to implement the changes.
commands have been enabled. For more
wmm
wlans Commands
turbo-voice
turbo-voice
328