Siemens scalance WLC711 Reference Manual page 130

Parameters
None
Example
The following example enables the ADDBA support:
WLC.siemens.com
n_aggr_mpdu
Use the
n_aggr_mpdu
disable this feature. The
ap3801, and ap:<serial> radio and ap38xx and <serial> contexts of the CLI for those APs that support it.
n_aggr_mpdu
no n_aggr_mpdu
Parameters
None
Example
The following example disables MPDU:
WLC.siemens.com
n_aggr_mpdu_max
Use the
n_aggr_mpdu_max
n_aggr_mpdu_max is accessible from the ap:defaults:11n, ap37xx, ap38xx, ap3801, and ap:<serial>
radio and ap38xx and <serial> contexts of the CLI for those APs that support it.
n_aggr_mpdu_max value
Parameters
value
Example
The following example sets the maximum length of the aggregate MPDU to 5000 bytes:
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:ap:defaults:11n:radio2# n_addba_support
command to enable the use of aggregate MPDUs. Use the
command is accessible from the ap:defaults:11n, ap37xx, ap38xx,
n_aggr_mpdu
:ap:defaults:11n:radio2# no n_aggr_mpdu
command to specify the maximum length of the aggregate MPDU. The
The maximum size in bytes for an aggregate MPDU.The range of values allowed is
1024 to 65535. When the radio mode is anac or ac-strict, the range of values allowed
is 1024 to 1048575.
:ap:defaults:11n:radio2# n_aggr_mpdu_max 5000
ap Commands
n_aggr_mpdu
command to
no
130