Siemens scalance WLC711 Reference Manual page 307

Usage
The following configurations must already be in place before this command is available:
•
<radius-server>
•
config <radius-server> role mac
•
mac enable
See role_commands
Example
The following example selects the p6 policy to apply when authentication queries to this RADIUS
server time out:
WLC.siemens.com
remove
The command within context wlan:<WLAN-service-name>:auth removes the specified RADIUS
remove
server from the list of configured RADIUS servers.
remove radius
Parameters
radius
Example
The following example removed the RADIUS server "radius1" from the list of RADIUS servers to be used
with the "new-wlans" WLAN:
WLC.siemens.com
show
Use the command to display the current authentication settings of the specified individual WLAN
show
service. The command is accessible from the wlan:<WLAN-service-name>:auth context of the CLI.
show
The following example displays the current authentication settings for the WLAN service named
Lab126-12-AAA:
WLC.siemens.com
No radius server has been selected
Priority Name
1 IAS
1 IAS
MAC-based authorization: disable
Authentication mode: 8021x
AP as VSA attribute: enable
SSID as VSA attribute: enable
VNS as VSA attribute: enable
Policy as VSA attribute: enable
SCALANCE WLC711 CLI Reference Guide
for creating and naming policies.
:wlans:new-wlans:auth# radius-timeout-policy p6
Specifies the name of the RADIUS server to remove.
:wlans:new-wlans:auth# remove radius1
:wlans:Lab126-12-AAA:auth# show
Role NAS IP
auth Use VNS IP address
acct Use VNS IP address
NAS ID Auth Type
Use VNS name EAP
Use VNS name
wlans Commands
remove
307