Siemens scalance WLC711 Reference Manual page 142

Example
The following example sets the noise threshold to -50 dB:
WLC.siemens.com
occupancy_threshold
Use the
occupancy_threshold
occupancy_threshold
dcs contexts of the CLI.
occupancy_threshold thrshold
Parameters
thrshold
Example
The following example sets the DCS Channel Occupancy Threshold to 10 per cent:
WLC.siemens.com
radio_channels
Use the
radio_channels
selection (ACS). The
radio_channels
Parameters
None
Examples
WLC.siemens.com
Available radio channels:
1: 2412 MHz
2: 2417 MHz
3: 2422 MHz
4: 2427 MHz
5: 2432 MHz
6: 2437 MHz
7: 2442 MHz
8: 2447 MHz
9: 2452 MHz
10: 2457 MHz
11: 2462 MHz
WLC.siemens.com
SCALANCE WLC711 CLI Reference Guide
:ap:defaults:ap37xx:radio1:dcs# noise_threshold -50
command to set the DCS Channel Occupancy Threshold. The
command is accessible from 11n, ap37xx, ap38xx, dualband, std, and <serial>
Specifies the DCS Occupancy Threshold as a percentage. The DCS Occupancy Threshold
must be in the 10 to 100 range.
:ap:defaults:ap37xx:radio1:dcs# occupancy_threshold 10
command to display the list of available radio channels for auto channel
command is accessible from all dcs contexts of the CLI.
radio_channels
:ap:defaults:11n:radio2:dcs# radio_channels
:ap:defaults:std:radio1:dcs# radio_channels
ap Commands
occupancy_threshold
142