Siemens scalance WLC711 Reference Manual page 396

Usage
You specify the policy by its name. If you enter the command without a <policy-name>, the CLI displays
a list of available policies by the names they were given when they were created.
Examples
The following example shows a listing of available policies:
WLC.siemens.com
The available policies:
WirelessAuthPolicy
WirelessNonAuthPolicy
C25TV1NonAuthPolicy
C25TV1AuthPolicy
mitigatorNonAuthPolicy
mitigatorAuthPolicy
The following example assigns a policy to site1:
WLC.siemens.com
assign-wlan
Use the assign-wlan command to configure a WLAN assignment to the site.
The
assign-wlan
assign-wlan wlan-name (none|radio1|radio2|both)
Parameters
wlan-name
none|radio1|radio2|
both
Usage
You specify the WLAN by its name. If you enter the command without a <wlan-name>, the CLI displays
a list of available WLANs by the names they were given when they were created.
Example
The following example shows a listing of available WLANs:
WLC.siemens.com
The available WLANs:
WirelessWLAN
C25TV1WLAN
mitigatorWLAN
SCALANCE WLC711 CLI Reference Guide
:site:site1# assign-policy
:site:site1# assign-policy add WirelessAuthPolicy
command is accessible from the site:<named-site> context.
Specifies the named WLAN service to assign to this site.
Specifies the radio(s) on the site to which the WLAN service is applied.
:site:site1# assign-wlan
site Commands
assign-wlan
396