Siemens scalance WLC711 Reference Manual page 294

Example
The following example sets the minimum length for the guest portal access account password to 12
characters:
WLC.siemens.com
WLC.siemens.com
WLC.siemens.com
minpasswdlength 12
redirect
Use the
redirect
the Default Redirection URL.
After you run the
redirect
redirect value_string | none
Parameters
value_string
none
Usage
The guestportal, internal or splash authentication mode must be set for this command to be available.
For more information, see
Example
The following example specifies the internal network URL to which to redirect connecting users:
WLC.siemens.com
192.168.1.38
WLC.siemens.com
send-login
Use this command to specify the type of captive portal redirection URL for successful logins. The
command is available from the wlan:<WLAN-service-name>:auth:captiveportal context.
login
send-login original-dest | cp-session | custom
Parameters
original-dest
cp-session
custom
SCALANCE WLC711 CLI Reference Guide
:wlans:CNL-CP:auth:captiveportal# minpasswdlength 12
:wlans:CNL-CP:auth:captiveportal# apply
:wlans:CNL-CP:auth:captiveportal# show minpasswdlength
command, within context wlan:<WLAN-service-name>:auth:captiveportal, to specify
command, run the
Specifies a URL beginning with http://
Specifies that no Default Redirection URL is configured
mode on page 302.
:vnsmode:CNL-7-CP:auth:captiveportal# redirect http://
:vnsmode:CNL-7-CP:auth:captiveportal# apply
Use the original destination value configured by the Wireless Assistant GUI.
Use the captive portal session page value configured by the Wireless Assistant GUI.
Use the custom specific URL value configured by the Wireless Assistant GUI.
command to implement the changes.
apply
wlans Commands
redirect
send-
294