Siemens scalance WLC711 Reference Manual page 147

The following example removes an entry from the Wireless Appliance list by IP address:
WLC.siemens.com
The following example removes an entry from the Wireless Appliance list by rank:
WLC.siemens.com
antennaleft
Use the
antennaleft
accessible from the <serial> context of the CLI if the AP supports configuration of a left antenna. To
display a list of the available antenna models, enter the command without arguments. The
command is accessible from the ap:<serial> context of the CLI.
antennaleft
The antenna commands available are dependent on the AP type.
antennaleft antenna_model
Parameters
antenna_model
Examples
This example lists the valid antenna models that can be entered with this command, then executes the
command with an appropriate model number:
WLC.siemens.com
<antenna_model>
antenna_model:
<list of valid antenna models>
WS-ANT01 AG 4dBi Omni Factory
No Antenna
WLC.siemens.com
This example removes a configured left antenna:
WLC.siemens.com
antennamiddle
Currently this command is not supported.
antennamiddle antenna_model
Parameters
antenna_model
SCALANCE WLC711 CLI Reference Guide
:ap:0409920201204003# no aclist 167.232.92.39
:ap:0409920201204003# no aclist 1
command to select an antenna supported by the Wireless AP. This command is
Model name of an antenna supported by the Wireless AP.
:ap:0500010032150135# antennaleft Usage: antennaleft
:ap:0500010032150135 antennaleft WS-ANT01 AG 4dBi Omni Factory
:ap:0500010032150135 antennaleft No Antenna
Model name of an antenna supported by the Wireless AP.
ap Commands
antennaleft
147